Stationary Simulated TV Camera is affordable protection at an extremely low price.

This camera can be used indoors or outdoors.  **If used outdoors, it must be protected from moisture**

• Dimensions  4″ x 2″ x 2″
• Real Security Camera Housing
  Although this is a low-end budget model, once mounted off the ground, people who see it will believe the area is being monitored.
• Easy To Install
  Installs in minutes with hardware  & 2 warning stickers included
• Faux Cable
  Gives the appearance the camera is connected a recording device.
• Use With Or Without Red LED
• Flashing Light And Movement
• Battery Operated
  For those that wish to utilize the flashing light and movement feature install three “AA” batteries (included) and turn the unit on. To access the battery compartment, remove the battery cover on the top of the camera.

This unit contains a motion activated red led light and has motorized pan movement.  When the motion sensor detects movement, it will activate the flashing light and make the camera move left to right for approximately 20 seconds and then stop until it detects motion again.  This is a lower end, value model so the motion sensor is not very sensitive.  Typically picks up motion within 3-5 feet.  This means the light and movement will not be activated unless someone is within that range.

The camera has one on/off switch for light and movement.  Cannot activate only the light or only the movement.  When the on/off switch in the on position, both will be activated when the unit senses motion.